docking-stations.info

This page contains affiliate links. We may earn a commission at no extra cost to you. Read our affiliate disclosure.

Anker 568 Review 2026 - Specs, Pros & Cons

7.5 Very Good
Adrian Cel By Adrian Cel

The Anker 568 is a USB4 docking station that targets Windows laptop users who need a full desk setup from a single cable. Priced at $299.99, it provides 11 ports through a USB4 upstream connection running at 40 Gbps, which is a significant step up from the older Anker 575's 10 Gbps USB-C link. You get triple display output (two DisplayPort 1.4 plus one HDMI 2.0), 100W Power Delivery to your laptop, and a pair of front-facing USB-C data ports that double as 30W chargers for phones or tablets. On Windows, the dock supports up to three 4K displays at 30Hz, or two 4K displays at 60Hz, or a single 8K display at 30Hz via DisplayPort. There is no audio jack and no SD card reader here, so the port count is lower than the 575, but each port is faster and more capable. Note that Anker explicitly does not recommend this dock for MacBooks. If you need a Windows-focused USB4 dock with strong charging capabilities and multi-monitor support, the Anker 568 is worth a close look.

Strong Charger

Pros & Cons

What We Like

  • 100W Power Delivery charges even larger 15-16 inch laptops
  • 40 Gbps USB4 upstream provides more bandwidth than typical USB-C 10 Gbps docks
  • Two front USB-C ports with 10 Gbps data and 30W charging each
  • Triple 4K display output on Windows (2x DP 1.4 + 1x HDMI 2.0)
  • Single 8K@30Hz output via DisplayPort for high-resolution workflows
  • No drivers needed, native USB4 with DisplayPort Alt Mode
  • Kensington NanoSave lock slot for physical security

What Could Be Better

  • Not compatible with MacBooks per Anker's own recommendation

    Workaround: Use a Thunderbolt dock or a different USB-C dock that explicitly supports macOS.

  • No audio jack for headphones or speakers

    Workaround: Use your laptop's built-in audio jack, Bluetooth audio, or a USB audio adapter.

  • No SD or microSD card readers

    Workaround: Use a separate USB card reader connected to one of the dock's USB-A or USB-C ports.

  • Triple 4K display limited to 30Hz refresh rate

    Workaround: Use dual 4K@60Hz if you need smooth refresh rates. Reserve triple 4K@30Hz for static work like documents and spreadsheets.

  • All USB-A ports are on the rear, none on the front
  • Two of the four USB-A ports are USB 2.0 (480 Mbps only)

Display Support

Max Displays: 3
1 display (Single 8K@30Hz via DisplayPort 1.4)
7680x4320 @ 30Hz
1 display (Single 4K@60Hz via HDMI or DisplayPort)
3840x2160 @ 60Hz
2 displays (Dual 4K@60Hz via 2x DisplayPort (Windows only))
3840x2160 @ 60Hz
3 displays (Triple 4K@30Hz via 1x HDMI + 2x DisplayPort (Windows only))
3840x2160 @ 30Hz

Ports & Connectivity

USB Ports

2x USB-C 3.2 30W
2x USB-A 3.1
2x USB-A 2.0

Video Outputs

1x HDMI 2.0
2x DisplayPort 1.4

Network

1x Ethernet (1 Gbps)

Full Specifications

General
Manufacturer Anker
Model A8399
Release Date 2023-02
MSRP $299.99
Connectivity
Host Connection USB-C
Max Data Rate 40 Gbps
Driver Required No (native)
Display Output
Max Displays 3
1x Display 7680x4320 @ 30Hz (Single 8K@30Hz via DisplayPort 1.4)
1x Display 3840x2160 @ 60Hz (Single 4K@60Hz via HDMI or DisplayPort)
2x Display 3840x2160 @ 60Hz (Dual 4K@60Hz via 2x DisplayPort (Windows only))
3x Display 3840x2160 @ 30Hz (Triple 4K@30Hz via 1x HDMI + 2x DisplayPort (Windows only))
Ports (9+ total)
USB-C 3.2 2x (30W)
USB-A 3.1 2x
USB-A 2.0 2x
HDMI 2.0 1x
DisplayPort 1.4 2x
Ethernet (RJ45) 1x 1 Gbps
Power
Power Input DC-barrel
Laptop Charging Up to 100W

Compatibility

Windows (10+)

Full support including triple display. USB4 or Thunderbolt 4 port recommended for best performance.

Linux

Reported working on some distributions including Framework laptops. Verify USB4 support in your kernel.

Known Issues

macOS (all versions)

Not supported by Anker

Laptops without USB4/Thunderbolt 4/DP Alt Mode

No video output

7.5 /10

Our Verdict

Very Good

The Anker 568 is a solid USB4 docking station for Windows users who want fast upstream bandwidth and strong charging in a compact package. Its 40 Gbps USB4 connection gives it more headroom than older USB-C 10 Gbps docks, and the 100W Power Delivery is enough to charge even larger 15-16 inch laptops without needing a separate charger. The dual 30W USB-C ports on the front are a genuine convenience for keeping phones and tablets topped up during the workday. Display support is good on Windows, with up to three 4K monitors or a single 8K panel, though triple 4K is limited to 30Hz. The main drawbacks are clear: no macOS support (per Anker's own guidance), no audio jack, no SD card reader, and no front-facing USB-A ports. At $299.99, the price is competitive but not cheap. You can often find it discounted to around $200 or less, which makes it a better deal. For Windows users who prioritize charging power, USB4 bandwidth, and multi-monitor output over port variety, the Anker 568 delivers where it counts. Mac users should look elsewhere.

Available at Amazon

Frequently Asked Questions

Does the Anker 568 work with MacBooks?
No. Anker explicitly states this dock is not recommended for MacBooks. Multi-display output will not work on macOS, and other features may behave unpredictably. If you need a Mac-compatible dock, look at Thunderbolt 4 options like the CalDigit TS4 or the OWC Thunderbolt 4 Dock.
Can the Anker 568 charge my laptop while I use it?
Yes. The Anker 568 delivers up to 100W of USB-C Power Delivery to your laptop through the host cable. This is enough to charge most 13-16 inch laptops at full speed. Very large workstation laptops that require more than 100W may charge slowly or not at all.
What is the difference between the Anker 568 and the Anker 575?
The Anker 568 uses a USB4 upstream connection at 40 Gbps, while the Anker 575 uses USB-C 3.2 at 10 Gbps. The 568 also delivers 100W charging (vs 85W) and has faster front USB-C ports with 30W charging. However, the 575 has more ports overall (13 vs 11), including SD/microSD readers and a headphone jack that the 568 lacks.
Can the Anker 568 drive three 4K monitors at 60Hz?
Not simultaneously. The dock supports triple 4K at 30Hz, or dual 4K at 60Hz. If you need three monitors at 60Hz, you will need to drop at least one to 1440p or 1080p resolution. The 40 Gbps USB4 bandwidth cannot sustain three 4K@60Hz streams at the same time.
Does the Anker 568 have a vertical stand?
The Anker 568 has a flat, horizontal form factor. It does not include a vertical stand. Its dimensions are 209 x 79 x 32mm, making it compact enough to sit behind a monitor or on a desk shelf.

Related Products